Incomimex, S.L. - Coupling accessories
RUD Power Point
Cáncamos For volteo and manipulation: special for the transport of moulds, matrices and coin
The German manufacturer RUD, specialised in the manufacture of cáncamos in steel of high resistance, offers his payment of cáncamos giratorios Power Point, that commercialises Incomimex.
Between his main advantages fits to stand out his optimum design, that provides the sufficient space to avoid the involuntary contact of the hooks, grilletes, chains, etc., with the load so that it avoids any damage to the piece mechanised.
Besides, they connect directly to any terminal hooks, anilla, garzas of wire, eslingas of chain and of polyester, etc., without need of any element of union between both systems. They are realised in steel aleado to the CR, Neither and Mo, with special thermal sensors treatment, and manufactured with double rolling of balls. This allows them adapt to any position of shot without reduction in the capacity of load. Besides, they are able to turn under lar loads of perfect form, without tugs. 100% of the components are testados against fissures by means of essay of magnetic particles.
This type of cáncamos are thought to contribute the suitable solution in the volteo, manipulation and transport of moulds, matrices and coin. They have been designed to avoid many of the big errors that follow committing still in these sectors, errors that come mainly marked by the use of cáncamos galvanised DIN 580 in steel St 35. The use of these cáncamos is not very advisable in the elevations of loads in which they exist lateral shots and even less in the volteos of these pieces. The cáncamos fixed adopt the position of ring of the eslinga, causing that they unscrew and generating a situation of high risk in which in cáncamo is not supported totally in his base. In this situation, the lateral tension will bend the espárrago of the cáncamo DIN 580, exceeding the limits of hygiene established for the manipulations of loads.
Between his main advantages fits to stand out his optimum design, that provides the sufficient space to avoid the involuntary contact of the hooks, grilletes, chains, etc., with the load so that it avoids any damage to the piece mechanised.
Besides, they connect directly to any terminal hooks, anilla, garzas of wire, eslingas of chain and of polyester, etc., without need of any element of union between both systems. They are realised in steel aleado to the CR, Neither and Mo, with special thermal sensors treatment, and manufactured with double rolling of balls. This allows them adapt to any position of shot without reduction in the capacity of load. Besides, they are able to turn under lar loads of perfect form, without tugs. 100% of the components are testados against fissures by means of essay of magnetic particles.
This type of cáncamos are thought to contribute the suitable solution in the volteo, manipulation and transport of moulds, matrices and coin. They have been designed to avoid many of the big errors that follow committing still in these sectors, errors that come mainly marked by the use of cáncamos galvanised DIN 580 in steel St 35. The use of these cáncamos is not very advisable in the elevations of loads in which they exist lateral shots and even less in the volteos of these pieces. The cáncamos fixed adopt the position of ring of the eslinga, causing that they unscrew and generating a situation of high risk in which in cáncamo is not supported totally in his base. In this situation, the lateral tension will bend the espárrago of the cáncamo DIN 580, exceeding the limits of hygiene established for the manipulations of loads.
