Schlüter Systems, S.L. - End profiles
Schlüter Dilex-KSBT
Boards of separation: for pavings and coatings ceramic
Schlüter-Dilex-KSBT Is a profile for boards of separation that no precise maintenance and that has been conceived for floors of baldosas or of natural stone.
Schlüter-Dilex-KSBT Causes an interruption of the resonance in the material of revestimiento, reducing in this way the transmission of noises, for example in landings of ladders.
Can cut the flexible zone if the movements do not remain absorbed by the enclosed zone of movement. Of this form the profiles of 20 mm of width can absorb movements of ± 5 mm, and the profiles of 30 mm of wide movements of ± 10 mm.
The profile can place so much in the floor as of continuous form in walls. It is likewise ideal for the use of plates of pladur in ceilings and walls or directly in the revoke or in the solado.
The profiles of lateral fixation with perforación trapezoidal manufactured in stainless steel, brass or aluminium go joined to a zone of movement brandish of 20 or 30 mm of width, manufactured with thermoplastic elastomer. In case to result damaged can substitute the flexible part.
The metallic profiles protect of durable form the singings of the coatings. The zone of wide movement causes the restriction of the capacity of load in case of presences of punctual loads in the soft zone.
Schlüter-Dilex-EKSBT With profile bearer of stainless steel of the classes 1.4301 (V2To) or 1.4404 (V4To) is especially ideal for those applications that in addition to a high mechanical resistance also sues a high resistance against the aggressions of chemical type as, for example, those that derive of the contact with sour substances, alcaline or cleaning products.
Schlüter-Dilex-MKSBT With profile - support of brass shows a high resistance against the exigencias of mechanical type and is resistant to the chemical products that use usually with the coatings of baldosas.
Schlüter-Dilex-AKSBT With profiles of lateral fixation of aluminium is sensitive to the alcaline substances. The cements combined with the humidity cause an alcaline effect that, depending of the level of concentration and of the length of the aggression, can cause corrosion (learning of hydroxide of aluminium).
Schlüter-Dilex 30 / SEES is a profile in shape of Or of stainless steel brushed. It is designed to improve the aesthetics and increase the mechanical resistance of the zone of movement of the profile Schlüter- Dilex-KSBT 30.
The zone of movement of all the models of profile of Schlüter-Dilex-KSBT is manufactured with thermoplastic elastomer highly flexible. The material is to a large extent resistant to all the chemical products that usually employ in combination with ceramic coatings and besides treated with fungicidas and bactericidas. The insertion is resistant to temperatures between -60 °C and +100 °C. The thermoplastic elastomer can solder to prolong the profiles.
Schlüter-Dilex-KSBT Causes an interruption of the resonance in the material of revestimiento, reducing in this way the transmission of noises, for example in landings of ladders.
Can cut the flexible zone if the movements do not remain absorbed by the enclosed zone of movement. Of this form the profiles of 20 mm of width can absorb movements of ± 5 mm, and the profiles of 30 mm of wide movements of ± 10 mm.
The profile can place so much in the floor as of continuous form in walls. It is likewise ideal for the use of plates of pladur in ceilings and walls or directly in the revoke or in the solado.
The profiles of lateral fixation with perforación trapezoidal manufactured in stainless steel, brass or aluminium go joined to a zone of movement brandish of 20 or 30 mm of width, manufactured with thermoplastic elastomer. In case to result damaged can substitute the flexible part.
The metallic profiles protect of durable form the singings of the coatings. The zone of wide movement causes the restriction of the capacity of load in case of presences of punctual loads in the soft zone.
Schlüter-Dilex-EKSBT With profile bearer of stainless steel of the classes 1.4301 (V2To) or 1.4404 (V4To) is especially ideal for those applications that in addition to a high mechanical resistance also sues a high resistance against the aggressions of chemical type as, for example, those that derive of the contact with sour substances, alcaline or cleaning products.
Schlüter-Dilex-MKSBT With profile - support of brass shows a high resistance against the exigencias of mechanical type and is resistant to the chemical products that use usually with the coatings of baldosas.
Schlüter-Dilex-AKSBT With profiles of lateral fixation of aluminium is sensitive to the alcaline substances. The cements combined with the humidity cause an alcaline effect that, depending of the level of concentration and of the length of the aggression, can cause corrosion (learning of hydroxide of aluminium).
Schlüter-Dilex 30 / SEES is a profile in shape of Or of stainless steel brushed. It is designed to improve the aesthetics and increase the mechanical resistance of the zone of movement of the profile Schlüter- Dilex-KSBT 30.
The zone of movement of all the models of profile of Schlüter-Dilex-KSBT is manufactured with thermoplastic elastomer highly flexible. The material is to a large extent resistant to all the chemical products that usually employ in combination with ceramic coatings and besides treated with fungicidas and bactericidas. The insertion is resistant to temperatures between -60 °C and +100 °C. The thermoplastic elastomer can solder to prolong the profiles.
