The cuádruple thermal sensors camera

In the plant of manufacture of lubricantes of Cepsa (Lubrisur) produce a big variety of oils lubricantes for automotive sector, industry, gears or marine. This plant needed modernizar the system for the warming of drums of additive, for what thought in the acquisition of a camera of warming.

For the design of the team had presents two fundamental factors: the need to heat the drums of additive to distinct temperatures, fulfilling strictly with the specifications given by the manufacturer of each additive, and to reduce the time of warming of the same. Besides, the elements of control of the thermal sensors camera had to be comandados by the system of control of the plant, leaving evidence of the fundamental parameters of operation: time of warming or temperature reached. The camera has capacity for eight palés American or eight IBC of 1.000 litres.

These requirements were exposed to the experts of Denios to which also posed other factors like the hygiene and ergonomics in his utilisation, elimination of the sequipment, minimisation of the environingingmental impact and the energetic efficiency. In definite, pretended have of a team that contributed an improvement to the productivity of the factory and had of the last technological advances.

The warming realises by means of steam of water to a pressesure of 6 bar and achieves that it was homogéneo in the substances by means of the recirculation of the hot air (convection), helped by the integral thermal sensors isolation of the camera. To achieve that the substances can be to +70 °C, is possible to reach a temperature of until +90 °C in the interior of the camera.

The temperature can supervise and control thanks to a connection to the centre of control of the plant. The thermal sensors camera is instrumented, besides, with cubeto of retention integrated cheese cheese and with four doors batientes isolated térmicamente that can use of independent form. Of this form, diminishes the consumption of heating and power. “The thermal sensors camera of Denios offered him to Cepsa a combination of first class for an economic warming of his additives at the same time that his workers and the environingingment remained perfectly protected”, explains the company.