FM Grupo Tecnológico - Hospital facilities
FM grupo tecnológico Station Transfer
Water transfer panels: control of basic parameters
The water transfer Panel is a necessary element in the installation of cooling equipment of electromedicine, which allows the control of several key parameters, such as flow, temperature and water pressure. These transfer panels are usually installed in the technical room and a remote control system for the control of the ModBus RS485 water chiller can be incorporated.
On many occasions the chiller's water, responsible for providing cold water system, needs to be installed in a relatively distant outer area and often difficult to access. FM Grupotecnologico has built-in remote control systems that allow you to operate on the chiller from the technical room adjacent to the scanning room.
Optionally have an emergency kit with water loss in the event of failure of the chiller. This system is especially important in cooling of the MRIs, since helium compressor must be 24-hour cooling to prevent the evaporation of helium, in case of failure. Transfer panels leave the factory fully tested, with instructions for its proper functioning, so the user has no doubt when handling such equipment.
On many occasions the chiller's water, responsible for providing cold water system, needs to be installed in a relatively distant outer area and often difficult to access. FM Grupotecnologico has built-in remote control systems that allow you to operate on the chiller from the technical room adjacent to the scanning room.
Optionally have an emergency kit with water loss in the event of failure of the chiller. This system is especially important in cooling of the MRIs, since helium compressor must be 24-hour cooling to prevent the evaporation of helium, in case of failure. Transfer panels leave the factory fully tested, with instructions for its proper functioning, so the user has no doubt when handling such equipment.
