Durán Electrónica, S.L. - Gas detectors
Duran Electrónica Standgas HC Pro LCD Tóx
For toxic gases and O2 detectors freelancers with LCD display: digital control over the status of the sensor
Standgas HC Pro LCD Tox is a new self-contained detector of electrochemical and infrared technology for the detection of toxic gases and O2.
Autonomous operation, do not require central.
Available gases: CO, NO2, NH3, Cl2, H2S, CO2 and O2.
Special features: - digital Control over the status of the sensor - testing automatic hardware - digital filter based on variable sampling of the averages of the values of the sensor - automatic thermal compensation that provides a correct response to variations in temperature (Standgas O2 does not require this feature) - accurate automatic zero setting. It monitors the zero in relation to the response of the sensor and the electronics. Standgas automatically performs a test every 30 minutes: If - drift - drift is greater than or less than 2% of the total value of the scale, is reajustara to zero; otherwise, the data will be shown as a reading.
-Only accessible features in factory allow to know the remaining useful life of the sensor, the manufacturing date and last calibration, as well as the serial number.
-Provided with a 16 X 2 display lines, backlit and three keys.
-Lets you program the kind of level of pre-alarm, alarm level, initial state of the output of manoeuvre, whether manual or automatic reset, timing of rearmament, activation or not of the internal acoustics and possibility inhibit the sensor to prevent inappropriate maneuvers in case of breakdown.
-Calibrated at factory with gas pattern. They do not need to be recalibrated in its start-up.
Autonomous operation, do not require central.
Available gases: CO, NO2, NH3, Cl2, H2S, CO2 and O2.
Special features: - digital Control over the status of the sensor - testing automatic hardware - digital filter based on variable sampling of the averages of the values of the sensor - automatic thermal compensation that provides a correct response to variations in temperature (Standgas O2 does not require this feature) - accurate automatic zero setting. It monitors the zero in relation to the response of the sensor and the electronics. Standgas automatically performs a test every 30 minutes: If - drift - drift is greater than or less than 2% of the total value of the scale, is reajustara to zero; otherwise, the data will be shown as a reading.
-Only accessible features in factory allow to know the remaining useful life of the sensor, the manufacturing date and last calibration, as well as the serial number.
-Provided with a 16 X 2 display lines, backlit and three keys.
-Lets you program the kind of level of pre-alarm, alarm level, initial state of the output of manoeuvre, whether manual or automatic reset, timing of rearmament, activation or not of the internal acoustics and possibility inhibit the sensor to prevent inappropriate maneuvers in case of breakdown.
-Calibrated at factory with gas pattern. They do not need to be recalibrated in its start-up.
