'Outstanding machines' Cimag 2009
February 6, 2009
AGCO Iberia - Division Valtra
Front hitch Valtra LH-Link in the series Versus tractors
This front hitch stands out for its ability to rotate ±35 ° depending on the angle of rotation of the tractor, or independently of the same address, allowing the apero adaptation to the characteristics of the terrain and the operation carried out (displacement curve).
It includes support through which binds to the tractor and a frame with an axis of vertical rotation and two independent elevators, hydraulic cylinders. The elevation is produced without provoking efforts of torsion and cylinders include sensors that transmit their position to an electronic controller. The arms can level independently, by facilitating the operations of insert and unhook the implements and, once levelled, the cylinders are locked hydraulically. The controls that make it possible to work with angle of rotation fixed (selected position), are located in the driving position by turning the same angle to the direction or proportional to (between 100 and 200%), and independently to the wheels.
Iberian BCS
Motor monkey Shredder Bladetuner 75 - BCS
This Shredder stands out for its horizontal rotor with blades floating in the form of and located on the axis of rotation on several lines, with slightly misaligned positions, allowing the mowing and crushing of the product as well as his uniform spread on the ground. The working width is 75 centimeters. You can work on surface of grass and in areas with grass and weeds of high altitude, such as reedbeds, stubble, etc. An adjustable baffle allows to adjust the degree of crushing of the residue, and the download takes place in vertically, minimizing the risk of projections for the people who manage.
Can be equipped with petrol engines (12.2 CV) or diesel (10 HP), being its manual starting. It has 4 relationships of change forward and 3 reverse with rapid investment system.
Iberian CLAAS
Manipulative telescopic Scorpion with transmission Varipower Plus
This model has a hydrostatic transmission which uses pump and motor for axial piston variable and 0 to 45 ° angle, along with another axial piston engine and cylinder fixed mechanically attached to the engine's variable. With the variation of a cylinder capacity between pump and motor can be constant efficiency drive up to 32 km/h; the convertible fixed engine allows to maintain benefits up to 40 km/h. With this system the displacement can be from 0 to 40 km/h on a continuous and progressive without stepping, ensuring the ability of high and low-speed traction.
Commercial agricultural mechanization
Mower-towelette front Elho NM-320 (f)
This front towelette mower of disks includes a system of hydropneumatic suspension that allows to reduce the pressure of the machine on the ground, and to increase its stability. The hydrodynamic suspension system allows a great range of motion (pendulum central) with the possibility of rotation around a central vertical axis and displacement up to overcome any obstacle.
There is a conditioner of mobile fingers of steel with contra-peine, which spins at 1000 rpm, on a cutter with eight drives for a working width of 3.20 m, 3.0 m in width for transport.
Durán agricultural machinery
Rotoempacadora-encintadora McHale Fusion 2
The rotoempacadora of roller and fixed with incitadora in separate camera camera stands out for its compact construction, with a total length of 5.8 m, which allows you to maneuver easily in small plots. The passage of the paca in the House of packed to the curb is achieved through the tipping of the set of 5 rollers that form the bottom of the camera of packed. The transfer of the bales is produced in a single step to open and close the camera setting of packing. There are no problems when working on slopes, when the paca is supported on the sides of the camera.
John Deere Iberian
Tractor-John Deere 7430 and 7530 E
These tractors are notable for incorporating on the crankshaft of the engine of a generator that produces an electric current of up to 20 kW of power, to a regime of the engine of 1800 rev/min. This electrical power is used for the actuation of the fan, the air and the installation of air conditioning compressor. This electric network feeds to the conventional 12-volt system, which increases his power in more than 50%.
With the tractor parked and running at low regime of the engine, it is possible to feed electrically external teams to the voltage of 230 volts, through a biphasic power outlet, and 230/400 volts, through a three-phase takes, with maximum power of 5 kWwhich allows to replace a portable generator.
The electric drive of the auxiliary groups improves efficiency, which manifests itself in lower fuel consumption. The electrical power network is established the possibility of precise and efficient electric drive on the tools and as Assistant in many field operations.
John Deere Iberian
System of guided assisted LightBar (bar lights)
Stands out for its simplicity as a solution to the guidance in operations how of distribution of fertilizers and plant protection, while avoiding overlapping, and is composed of a console from which is the configuration, in which the light signals of address are displayed, and a receiving antenna StarFire 300 with a capacity of reception of the signal free of differential GPS Egnos.
The bar of lights is installed in the windscreen by means of a suction cup and works as a unit of independent guidance. On it you can define line basis, the space between past and centered, as well as the brightness of the led indicators. Green and red lights indicate the position of the tractor with respect to the specified path. Each illuminated red led indicates a deviation of 10 cm. The set can be a machine to another and only needs to run a 12-volt electrical outlet.
Iberian Kuhn
Rotary mower GMD 3110 Lift Control
This Rotary mower is notable for the cutting system which guarantees their perfect adaptation to the ground, in which the transmission to the disks is done in a crankcase sealed and lubricated for life, with more spacing between the discs that rotate in convergent respect to favour the evacuation backwards from mowing hay.
It has a rapid system of blades, with a membrane of subject using special tronillos, leaving the blade free to remove the membrane. The ground pressure is distributed evenly by the pendulum articulation of the bar, which includes a system of non-stop security for elevation from the obstacle, and the hydraulic lift for the round in the headboards. The folding is done by rotation of 90 ° backward.
New Holland
Tractor significantly Deluxe & SuperSteer with PowerClutch
The tractor stands out as the tractor of less than 100 HP of power that include the system address SuperSteer and transmission Dual Command 32 x 16 with the device PowerCluthc that allows to change in a group of 8 speeds without stepping on the clutch. The front axle has a 76th effective rotation angle, so the minimum turning radius is reduced to 3.4 m. The traction in the front axle is connected when there is a slip of the wheel front to rear, to the curb, as well as when scrolling through slopes exceeding the 10th.
Available cabin with 4 square meters of glass surface, which provides very high visibility, and by its size and maneuverability makes it suitable for working on small plots, permanent crops and livestock facilities inside.
New Holland
Series FR9000 with system Varioflow and Turbo Compound forage harvesters
It is notable because you can change the configuration of the machine, removing the crusher grain, using a manually operated hydraulic pump, to move from the chopped corn to the grass, and in the opposite direction, in just two minutes with only one operator and without effort. The processor-Crusher of grains are two grooved rolls from 250 mm in diameter. Remove the processor produces a rapprochement of the blower to the picador, with a reduction of the distance between the two of 60%, to avoid the turbulence that may occur when removing the processor in the stinging of forage with conventional geometry. The engine includes a supercharger composed, consisting of conventional air-to-air supercharger and a second turbine, located in the exhaust, which provides mechanical power in the crankshaft of the engine, which allows to increase his power by 8% without increasing the consumption of fuel.
Same Deutz-Fahr Iberian
System Common Rail (DCR) Deutz engine Deutz Fahr Agrotron X 710, Lamborghini R6.185 DCR and Same Iron 115 DCR tractors
Common rail injection system has two bombs injectors integrated in the engine block and lubricated with the oil of the same, which makes the system very reliable regardless of the quality of the fuel used. The system incorporates a filter with detector of water, which warned of its presence in the fuel, and allows you to delete it quickly using a small decanter with a system of opening without tools. These engines also incorporate AGRex internal exhaust gas recirculation system to reduce NOx emissions without loss of efficiency.