Pavilion 7, stand To-B/5-10
Claas Presents in FIMA with all his potential for the harvest and in tractors
The German multinational attends to Saragossa betting strong so much in harvest, where is world-wide referent, as also in tractors, space in that already it is doing an important gap to European level. The big novelties in the stand of
The Lexion 760 TT, one of the stars in the stand of Claas in FIMA, is a cosechadora with engine CAT C13 with a maximum power of 490 CV. Like system of trilla possesses the Claas APS, with cylinder accelerator and precóncavo with three sections with step of 10 mm, and cylinder enclosed accelerator of eight bars and concave main with step of 7/18 mm. When treating of a hybrid machine, combines the trilla tangential previous with the back axial separation conformed by two rotors of 4,20 m of length and a diameter of 445 m, with continuous variator of the same in a rank of 350 to 1.050 rpm. The separation possesses the system ‘Jet Stream' where has increased the stair between the bottom of manufacturing and the first selection, giving air to this space through a specific diffuser for this zone, realizar a prelimpieza exhaustive that leaves the material to the upper and inferior selection practically clean of material, increased the efficiency of the surface of separation.
Carries mounted like element of rolling Terratrac composed by two big wheels of traction and two intermediate rollers of adaptation to the floor and subjection of the band of rolling.
Fits to stand out his picador-esparcidor radial. It is formed by a picador with 72 blades and esparcidor of tamo, and both pour his product processed and/or hammered on a radial fan with possibility to adjust the shot to the two sides. To this device, has installed him a system of automatic control of shot of tamo in function of the wind or the slopes. Two pletinas of metal, situated in the side of the machine and in perpendicular with transversal wind, bend by effect of the slope or the wind, commanding an electronic signal so that the esparcidor radial direct the stream of material against of the slope or of the wind, of such way that scatter the material hammered and tamo uniformly along the width of the cut. This novelty has been rewarded like ‘Technical Novelty' by the jury of FIMA 2014.
The new generation of tractors Axion no lacking in FIMA
The series 900 of Axion presents for the first time in FIMA like the biggest series of the family of conventional tractor of Claas, with four models (920, 930, 940 and 950) and nominal powers from 321 to 416 CV. This power, provided by motors of 6 cylinders FPT Cursor 9 of 8710 cc, is managed by a transmission CVT with a high efficiency of his mechanical part and that allows three ways of driving (automatic, drivestick and manual), to which his sum a control of cruise. The new cabin of 4 sticks allows one expands visibility, and together with the disposal of the controls and the system of information CEBIS of Claas in the interior, more the independent mechanical suspension to 4 points, contributes a high level of comfort to the user.
The series of tractors Axion 800 is the first launched to the market that fulfils with the phase of broadcasts Tier IV, using only the technology SCR to reduce the level of pollution. It consists of 4 models, between which finds the recently awarded ‘Tractor trucks Of The Year 2014', the model 850, that deliver from 208 to 253 CV of power. The management of transmission realizar with the efficient and recognised box of changes Hexashift, with 4 ranges robotizadas and 6 speeds under pair in each one of the ranges, that beside the automatism Hexactiv allow an automatic management of the courses in function of the diet of load of the engine.
Simulate the handle of cosechadoras and tractors from a PC
Another of the big novelties that has received the recognition as 'Technical Novelty' is the on-line simulator of Claas for the handle of cosechadoras and tractors that allows for the first time collect all the variety of dynamic behaviours of a machine in different conditions through a screen of PC. The user can work on-line simulating the management of a complex cosechadora or tractor of independent form of the real times of use.